# Adding billable items
Source: https://support.effra.io/adding-billable-items
When you onboard with Effra, we'll work with you to configure your existing billable items so that we know how they should be submitted to each insurer.
In this article, we'll cover how you can add new billable items if you start billing for new services.
Please note, Effra currently only allows users to add billable items using a service code that they already have in use for another item. If you need to add a completely new treatment type, you will need to liaise with us via [support@effra.io](mailto:support@effra.io).
## Adding a billable item from an invoice
If Effra receives an invoice containing a **line item** that we don't yet have a **billable item** configured for, we'll let you know with an **Action Required** message on the invoice.
You can select the appropriate procedure directly from the form in the invoice. Once you've done this, we'll save it as a new billable item so that Effra recognises it for future invoices.
If you're unsure which procedure to select, please get in touch with us and we'll be happy to help.
## Adding a billable item from your settings
You can also add new billable items at any time from your settings.
1. Go to **Settings → Billable Items**.
2. Select **Add billable item**.
3. Enter the **Description** exactly as the corresponding line item appears in your PMS.
4. Under **Find procedure**, search for the relevant procedure and select it from the dropdown.
5. Select **Create billable item**.
Where you have different billable items for different insurers, make sure the description you enter exactly matches the relevant insurer-specific billable item in your PMS.
## Choosing the correct service code
Under **Find procedure**, search using a general description of the service, such as 'initial physio appointment'. This will help you find and select the correct **service code** for the billable item from the dropdown.
The service code is used when Effra submits an invoice to the insurer, so it's important to select the correct one.
If you're unsure which procedure to choose, please get in touch with us. Insurer service codes can sometimes be confusing, and we're happy to help you make sure the billable item is configured correctly.
## Editing or disabling a billable item
Billable items can't currently be edited or deactivated from your Effra settings.
If you've added a billable item incorrectly, need to change its configuration, or no longer want Effra to use it, please get in touch with us and we can make the change for you.
## Billing for Shockwave treatments
### Bupa
Bupa shockwave treatments are now billed **per session**, rather than as an upfront package.
Use the following codes and fees:
* **AB129 — Initial physiotherapy session with Shockwave**
* **AB130 — Follow-up physiotherapy session with Shockwave**
Create an invoice for each appointment as it takes place.
If you previously billed Shockwave packages, update your billable items and Bupa codes in Effra to reflect this change. The old surgical Shockwave codes should no longer be used.
If you need help updating your setup, please get in touch.
### Other insurers
All other insurers are billed via standalone shockwave sessions. These should be added to Effra using the service code **T7419.**
If you would like to bill shockwave treatments for specific conditions, please get in touch with us at [support@effra.io](mailto:support@effra.io).
# Challenges with claims
Source: https://support.effra.io/docs/challenges-with-claims
Some invoices are not initially paid by the insurer or the patient. This can happen for three different reasons. In each case, Effra gives you visibility of invoices in each category, works to resolve them automatically and lets you know when you need to take action.
Learn more about each scenario in the table below.
**What does this mean?**
In these cases, a claim has been submitted, but we have not received a response from the insurer (we see this challenge most frequently with AXA).
**Why does this occur?**
1. The insurer did not process the claim.
2. The insurer processed the claim, but Effra does not have a copy of the remittance containing the adjudication.
3. The insurer processed the claim and provided a remittance, but errors within the statement prevented Effra from automatically identifying the payment and linking it to the corresponding invoice. For instance, AXA sometimes merges invoices or makes typos in the invoice number.
**How is Effra helping to solve this?**
We understand that this scenario can often be very frustrating, so Effra takes the following actions:
1. We use AI to auto-correct mistakes in insurer remittances.
2. We manually review any mistakes that cannot be corrected automatically.
3. We request remittances to ensure we are not missing any.
4. We automatically resubmit claims if we haven't received a response after 45 days (for specific insurers).
5. We submit aged debt requests for invoices that do not appear in any remittances.
**What does this mean?**
This occurs when the insurer has rejected or part paid the claim, but the patient is not necessarily liable.
**Why does this occur?**
There can be a range of explanations for this outcome, not limited to:
1. The insurer needs more information to process the claim.
2. The insurer has incorrectly adjudicated the claim. For example, insurers often flag a patient’s second appointment on the same day as a duplicate, even if the invoice has a separate pre-authorisation code for a separate treatment.
3. The insurer requires some more information before they can process the claim.
4. The amount claimed is not in line with a clinic’s agreed rate with an insurer for a treatment.
5. The insurer cannot process the claim due to a mistake in the claim.
6. The clinic has made a claim for a treatment that their patient is not covered for.
**How is Effra helping to solve this?**
1. We give you visibility by displaying ‘insurer shortfall’ as a distinct category within the dashboard.
2. We notify you via email when insurer shortfalls are identified.
3. We automatically identify and challenge insurer shortfalls on your behalf through our feature ‘Effra Dispute’. For more information on how this works, please refer to our support article here: [Effra Dispute](https://support.effra.io/docs/using-effra/dispute).
4. We flag bad or missing invoice data so that you can update the invoice.
Where Effra cannot resolve the insurer shortfall for you, you should do one of the following:
1. Contact the insurer to resolve the issue or query their adjudication. Find our library of insurer contact details here: [Insurer contact details](https://support.effra.io/docs/insurer-contact-details)
2. Contact the patient to prompt them to either pay the invoice or contact the insurer to resolve the issue or query their adjudication. If you are struggling to get a response, it can be effective to send them the invoice directly.
3. Raise a support ticket within Effra and we will try to help where possible.
**What does this mean?**
In these cases, the patient has been invoiced, but their payment is overdue.
**How is Effra helping to solve this?**
To avoid this scenario, we strongly recommend that you get the patient’s card on file ahead of their first treatment, so that you can automatically collect payment from them if required. For more information on using card on file, please refer to our [Collecting patient shortfalls](/docs/using-effra/collecting-patient-shortfalls#collecting-patient-shortfalls) article.
If a card is not registered on file to the patient, here is how Effra handles these late payments:
When an insurer confirms a patient needs to pay a shortfall, Effra automatically emails the patient their invoice with a secure link to pay via Stripe.
If the patient has not paid after 5 days, Effra will display their payment as “Overdue” and we will notify you that it has become overdue. Then, our system will automatically resend the invoice every 5-7 days, depending on the time frame you have selected in your settings.
If the payment is still outstanding after 20 days, Effra will notify you so that you can contact the patient directly to resolve the issue.
# TM3
Source: https://support.effra.io/docs/getting-set-up/TM3
# Setting up TM3
To get TM3 set up there are two steps:
1. [Grant Effra access to TM3](#grant-effra-access-to-tm3)
2. [Set up payment types](#set-up-payment-types)
## Grant Effra access to TM3
Granting Effra access to TM3 is as simple as adding a new user.
1. From the top right of the screen click on your **user icon** and then select **Settings**
2. Click **Setup** and then **Users**
3. Click **Add**
4. Add the applicable locations to the new user and give them a name that's memorable to you
5. For **User Level** select **Practice Administrator**
6. Set the email address to **[robot@effra.io](mailto:robot@effra.io)**
7. Click **Create**
## Set up payment types
Effra will record payments back into TM3 when your invoices are paid. You need to set up custom payment types so that it's clear which payments have been created by Effra.
1. From the top right of the screen click on your **user icon** and then select **Settings**
2. From the menu that appears on the left, select **Configuration**
3. Select **Custom lists**
4. Under the **Please select a lookup** drop down select **Payment Types**
5. In the **Type new list value** enter "Effra insurance payment" then click **Add to List**
6. Repeat this for "Effra patient payment"
# Bank reconciliation
Source: https://support.effra.io/docs/getting-set-up/bank-reconciliation
To get the most out of Effra, connect your bank account so we can reconcile insurer payments all the way through to your bank account.
The benefits of connecting your bank account are:
1. We can check you have received the payment from the insurer for each remittance statement.
2. We can spot payments missing remittances and request them from the insurer to ensure your invoices have been reconciled.
Effra even handles cases where remittances are made up of multiple payments, which is common with some insurers.
To set up bank reconciliation just visit the [bank connections page](https://app.effra.io/settings/bank_connections) in the dashboard, click "Add New Connection" and follow the steps.
Effra will then automatically start reconciling your remittances to your bank account.
# Bupa Providers Online
Source: https://support.effra.io/docs/getting-set-up/bupa-providers-online
# Granting access in Bupa Providers Online
1. Log into [Bupa Providers Online](https://providersonline.bupa.co.uk/)
2. From the left sidebar menu click **Manage my details** → **Users** → **Add New User**
3. On the top right of the screen click [Find an existing user](https://providersonline.bupa.co.uk/providers-online/account/findUser)
4. Search for `HenryHeath`
5. Click **Add To Provider**
6. If prompted, set the **User Type** to **Delegate**
7. Set the permissions as below:
8. Click **Save New Permissions**
That's it! You're all set.
# Cliniko
Source: https://support.effra.io/docs/getting-set-up/cliniko
# Setting up Cliniko
To get Cliniko set up there are two steps:
1. [Grant Effra access to Cliniko](#grant-effra-access-to-cliniko)
2. [Set up billable items](#set-up-billable-items)
## Grant Effra access to Cliniko
1. From the left sidebar menu click **Settings**
2. Under **Our Clinic**, click on **Users & practitioners** then **Add user**
3. Enter a **First name** and **Last name** that will be clear for future reference for example **Effra** and **Ltd**
4. Enter [**robot@effra.io**](mailto:robot@effra.io) in the **Email** field
5. Select the **Power receptionist** as the security role
6. Select **No** under **Is this user a practitioner?**
7. Click **Create user** and enter your password to confirm
8. Click on the user you've just created to edit them. Then turn on **Allow Effra to create and update API keys**
9. Click **Update user** and enter your password to confirm
## Set up billable items
In order to bill each invoice correctly, Effra needs to know which procedure and insurer it's for. To do this, you can edit your billable items in Cliniko.
This is also the Cliniko recommended way to manage insurance billing so you can ensure each session is priced correctly and you never accidentally underbill.
1. From the left sidebar menu click **Settings** then under **Finances** click on **Billable items**
2. Review your list of **Billable items**:
1. The ideal format is **Insurer - Specialty - Consultation Type** for example **Bupa - Physiotherapy - Initial Assessment**
2. The **item code** can be whatever is preferred for you
3. Ensure you have one billing item for each type of procedure for each insurer. For example:
1. `BUPA - Physiotherapy - Initial Assessment`
2. `BUPA - Pelvic Floor - Follow Up`
3. `AXA - Hydrotherapy - Initial Assessment`
4. Ensure the billable item names have the insurer name in them as well as the name of the procedure
3. If you need to add any new billable item, click on the **Add service** or **Add other** button
# Insurer details
Source: https://support.effra.io/docs/getting-set-up/insurer-details
We will send you a form to complete with your provider and insurer registration details.
For each insurer, we will need the following details:
* Whether you submit as a clinic or as individual practitioners
* Your insurer registration number for each location or practitioner
* How you currently receive remittances
For each practitioner, we will need the following details:
* Their full name (as it appears on their insurer registration)
* Their specialty (physiotherapy, podiatry, osteopathy, etc.)
* Their professional registration number (GMC, HCPC, GOsC, etc.)
## Insurer portals
We access your insurer portals to submit claims and access your remittance statements.
We will send you specific instructions for each insurer portal.
### Supported insurer portals
* [Bupa Provider Online](./bupa-providers-online)
* WPA
* Healthcode
If the insurer does not have a portal we will provide you with a unique email address where you can send remittances.
# Mindbody
Source: https://support.effra.io/docs/getting-set-up/mindbody
# Setting up Mindbody
To get Mindbody set up there are three steps:
1. [Create a new staff user for Effra](#create-a-new-staff-user-for-effra)
2. [Connect your site to Effra](#connect-your-site-to-effra)
3. [Create payment methods](#create-payment-methods)
## Create a new staff user for Effra
1. From the left sidebar menu click **Staff** or follow this [link](https://clients.mindbodyonline.com/app/staff)
2. Create a new staff user for Effra
3. Tick *I want to create a login for this staff member*
4. Enter a **First name** and **Last name** that will be clear for future reference for example **Effra** and **Ltd**
5. Enter [**robot@effra.io**](mailto:robot@effra.io) in the **Email** field
6. Select **Reception** as the role
7. Select **All locations**
8. Set the **Send account setup email date** to today's date
9. Click **Save**
## Connect your site to Effra
1. Share your Mindbody Site ID with Effra. You can find your Site ID in the page footer when you are logged in to Mindbody.
2. When you receive the activation email from Mindbody, click the link to activate your site
3. Let Effra know when you have completed the activation process
## Create payment methods
1. Go to Settings -> Retail -> Payment Methods or follow this [link](https://clients.mindbodyonline.com/asp/adm/adm_tlbx_paymeth.asp)
2. Add the following payment methods with all checkboxes selected:
* `Effra insurance payment`
* `Effra patient payment`
# Nookal
Source: https://support.effra.io/docs/getting-set-up/nookal
# Setting up Nookal
To get Nookal set up there are three steps:
1. [Create a permissions group for Effra](#create-a-permissions-group-for-effra)
2. [Grant Effra access to Nookal](#grant-effra-access-to-nookal)
3. [Enable Nookal's Invoices & Quotes Upgrade Extension](#nookal-upgrade)
## Create a permissions group for Effra
1. On the menu at the top of the screen, click **Setup**
2. In the **Users** section, click **Permissions**
3. At the bottom right of the screen, click **Create New Group**
4. Enter a title for the new group (e.g. Effra) and select continue
5. The new permissions group will now appear in the table, and you are ready to select the items Effra requires. These are:
| Permissions Sub-Heading | Permissions Item | View or Edit? |
| - | :- | :- |
| Features | Services | View |
| Features | Permissions | View |
| Clients | Cases | View |
| Clients | Details | View |
| Clients | Accounts | Edit |
| Setup | Invoices | Edit |
| Setup | Case Titles | Edit |
| Setup | Integrations and API Keys | Edit |
| Integrations | API Keys | Edit |
| Administration | Pay Invoices | Edit |
| Invoices | Credits | Edit |
| Reports | Invoices Report | View |
## Grant Effra access to Nookal
Now, you can create a new user for Effra.
1. On the menu at the top of the screen, click **Setup**
2. In the **Users** section, click **Staff**
3. At the bottom right of the screen, click **Create Staff Member**
4. Give the new user a name that's memorable to you
5. Set the **Position** and **Discipline** to anything you would like, e.g. Accounts and Administrator
6. Set the **Status** to **Active**
7. For the **Permissions**, select "Effra", or whatever you named the permissions group that you just created.
8. Set **Locations** to **All Locations**, unless you only want Effra to support billing at some of your locations
9. Set the email address to [**robot@effra.io**](mailto:robot@effra.io)
10. Click **Create Staff Member**
## Enable Nookal's Invoices & Quotes Upgrade Extension
Lastly, you should enable Nookal's latest invoicing feature.
1. On the menu at the top of the screen, click **Setup**
2. In the **Extensions** section, click **Advanced**
3. Ensure the toggle for **Nookal's Innovation Hub** is switched on and click **Configure** beneath it
4. Within the **New Innovations** tab, use the toggle to switch on the **Invoices and Quotes Upgrade**
# Overview
Source: https://support.effra.io/docs/getting-set-up/overview
This page outlines the steps you need to take to get setup with Effra. The instructions will be sent to you in your onboarding email with links to complete each step.
1. [Share your provider and insurer registration details.](./insurer-details) Connect Effra to your insurance portals so we can submit claims and access your remittance statements.
2. [Connect Effra to your practice management system (PMS)](./supported-systems) so we can import new invoices and add payments once they're paid.
3. [Set up a Stripe account](./patient-payments) so we can collect patient payments on your behalf, for example for excess payments.
4. [Connect your bank account](./bank-reconciliation) so we can reconcile insurer payments all the way through to your bank account (optional).
# Patient payments
Source: https://support.effra.io/docs/getting-set-up/patient-payments
We use Stripe to collect patient payments on your behalf, for example for excess payments.
We will send you specific instructions for how to set up a new Stripe account.
We cannot reuse existing Stripe accounts, you will need to create a new one.
This is so Effra can create invoices on your behalf and track payments.
Effra covers the Stripe fees and Stripe will pay you directly into your bank account.
Stripe will send invoices on your behalf to the patient so please register as the clinic rather than as an individual.
You can control the branding of the invoices Stripe sends [here](https://dashboard.stripe.com/account/branding).
# Supported systems
Source: https://support.effra.io/docs/getting-set-up/supported-systems
* [Cliniko](/docs/using-effra/effra-and-your-pms/cliniko)
* [Mindbody](/docs/getting-set-up/mindbody)
* Jelly
* [TM3](/docs/using-effra/effra-and-your-pms/tm3)
* [Nookal](/docs/getting-set-up/nookal)
* [Splose](/splose)
* Meddbase
* Notara
If you don't see your practice management system listed please talk to us, we are always adding new systems to the list.
When you onboard, we'll need to get access to your practice management system to import your invoices and add payments once they're paid.
We will share specific instructions for your practice management system.
# Insurer contact details
Source: https://support.effra.io/docs/insurer-contact-details
| Insurer | Opening Hours | Phone Number | Options to Press |
| - | - | - | - |
| Aviva | Mon-Fri, 8 AM-6 PM | 0800 015 0107 | |
| AXA | Mon-Thu, 9 AM-5 PM | 01892 503030 | 1 → 2 → 2 |
| AXA Global | | 01892 503856 | 2 |
| Bupa | Mon-Fri, 9 AM-5 PM | 0345 755 3333 | 1 → 2 |
| Bupa Global | Mon-Fri, All hours | 01273 323563 | 2 |
| Healix | Mon-Fri, 9 AM-5 PM | 020 3376 3907 | |
| Vitality | Mon-Fri, 10 AM-3PM | 0800 092 9400 | 3 → 1 |
| WPA | Mon-Fri, 9 AM-4 PM | 01823 625170 | 4 → 3 |
# Introduction
Source: https://support.effra.io/docs/introduction
Effra's system explained
The steps below outline how to get going and get your invoices paid more quickly and easily using Effra.
1. Raise invoices within your practice management system (PMS) as normal. Effra will import and process these within 15 minutes.
2. Invoices will move into the "action required" state if they need your input and they have a note letting you know what's needed. You can use the filter at the top of the invoices page to see a [list of any invoices in “action required”](https://app.effra.io/invoices?query%5Bstatus%5D=\&query%5Bstatus%5D=Action+Required\&query%5Bdate_field%5D=Invoice+Date\&query%5Bdate_from%5D=\&query%5Bdate_to%5D=\&query%5Bprovider_id%5D=\&query%5Binsurer%5D=\&query%5Binvoice_number%5D=).
3. Once Effra has everything needed to submit the invoices, they move into the “submitted” state while they're waiting for the insurer to adjudicate them.
4. Effra will then automatically process your remittance statements but you just need to make sure we're getting them:
1. Bupa Providers Online - we would have set this up during your onboarding and we'll pull remittances automatically.
2. Remittance statements by email - forward these to the unique email address you were given during onboarding. We advise setting up a rule to forward them automatically. (Instructions for [Gmail](https://support.google.com/mail/answer/10957?hl=en-GB) and [Outlook](https://support.microsoft.com/en-gb/office/use-rules-to-automatically-forward-messages-45aa9664-4911-4f96-9663-ece42816d746)).
3. Remittance statements by post - take a high quality photo or scan and email these to the unique email address you were given during onboarding.
4. Healthcode - we can set up access to be able to get these automatically. If we haven't already set this up, contact [onboarding](mailto:onboarding@effra.io).
5. If any invoices are shortfalled and aren't the patient's responsibility (for example the insurer thinks you've charged too much) they will move into the “insurer shortfall” status. You should review these and decide what action to take. If you want to resubmit them, just let us know in the comments for that invoice.
6. For shortfalls that patients need to pay, Effra sends the invoice on the day it is raised. The due date is **5 days by default (D+5)**, and can be configured to **7 days (D+7)**. These use your branding and if the patient replies to ask a question it will go to you, so that you remain in control of the patient experience.
1. If you're using card on file, Effra will collect the payment automatically on the invoice due date (D+5 by default, or D+7 if configured).
2. If a patient has not paid, Effra will send up to 5 chase emails: every 5 days for D+5 invoices, or every 7 days for D+7 invoices.
3. If the invoice is still unpaid after the chase cycle, we'll email you to let you know so you can escalate.
If you need help with any invoice you can simply leave a comment on it and tick the “Send to Effra support” box then our team will get back to you.
# Supported insurers
Source: https://support.effra.io/docs/introduction/supported-insurers
The insurers Effra works with are:
* Aviva
* AXA
* AXA Global
* Bupa
* Bupa Global
* Healix
* Vitality
* WPA
For all other insurers we recommend you charge the patient directly and ask them to submit the claim themselves.
# Policy and pre-authorisation number formats
Source: https://support.effra.io/docs/policy-and-pre-authorisation-number-formats
Have a code that you can't identify? Use our free code checker [here](https://www.effra.io/resources/health-insurance-policy-number-authorisation-code-checker)
Each insurer has different possible formats for policy numbers and pre-authorisation numbers. Effra will automatically check these for you and highlight any issues.
# Policy & membership numbers
| Insurer | Possible Formats | Examples |
| - | - | - |
| **Allianz** | **P** + 4 to 9 digits
*Note: Allianz also have plan numbers, which have a different format.* | `P0123`
`P001234567` |
| **Bupa** | 9 or 10 digits (numbers only) | `123456789`
`1234567890` |
| **Bupa Global** | **BI** prefix followed by three groups of 4 digits separated by hyphens | `BI-1234-1234-1234` |
| **AXA** | 7 digits + 1 letter | `1234567A` |
| | **AXA/** or **HOL/** + letter + 7 digits | `AXA/A1234567`
`HOL/A1234567` |
| | Letter + 7 digits | `A1234567` |
| | 8 digits + 2 letters + 2 digits | `12345678PP01` |
| | **AXA-** + 2 letters + 6 digits | `AXA-AA000000` |
| | 2 letters + 6 digits | `AA123456` |
| | 3 letters + 5 digits | `AAA12345` |
| | 2 letters + 7 digits + 1 letter | `AA1234567A` |
| **AXA Global** | **INTL7** + 6 or 7 digits | `INTL1234567` |
| | Prefix from **AXI, AXE, AXC, BXI, BXE, BXC, HKE, KVE,** or **OGI** + 8 digits | `AXI12345678`
`BXE12345678` |
| **Aviva** | 6 digits + slash + 3 digits | `123456/123` |
| | 3 digits + 3 alphanumeric characters | `123A1A`
`123456`
`123ABC` |
| **Cigna** | 9 digits + hyphen + 2 digits | `123456789-01` |
| | 11 digits | `12345678901` |
| | 9 digits | `123456789` |
| | 5 digits + 1 letter + 3 digits | `12345A123` |
| **WPA** | 7–9 digits | `1234567`
`123456789` |
| **Vitality plan number** | **5** + 7 digits | `51234567` |
| | **200** + 5 digits | `20012345` |
| | **3000** + 4 digits | `30001234` |
| | **40000** + 3 digits | `40000123` |
| **Vitality membership**
**number** | Letter or digit + slash + 7 or 8 digits | `A/12345678`
`1/1234567` |
| **Healix** | 3–6 uppercase letters + 5 digits | `ABCDEF12345`
`ABC12345` |
| | **W** + 9 digits | `W123456789` |
| | 7 digits | `1234567` |
| | 7 digits + 1 letter | `1234567A` |
| | **OPTOA** + digit + slash + 9 digits | `OPTOA1/123456789` |
# Pre-authorisation numbers
| Insurer | Possible Formats | Examples |
| - | - | - |
| **Bupa** | 8 digits, always starting with **6** or **7** | `61234567` |
| **Bupa Global** | Letter **A** followed by 7–8 digits | `A12345678` |
| **AXA** | 3 letters + 4 digits | `ABC1234` |
| | **AXACLM** followed by 6–7 digits | `AXACLM1234567`
`AXACLM123456` |
| | **APP-** followed by 9 digits | `APP-123456789` |
| **AXA Global** | 7 digits | `1234567` |
| **Aviva** | 6 digits + slash + 2 digits + slash + 4 digits + slash + 3 digits | `123456/12/1234/123`
`123456\12\1234\123` |
| | 6 digits + slash + 2 digits | `123456/12`
`123456\12` |
| **WPA** | 6 letters | `MFSNNK` |
| **Vitality** | **10**, **11** or **12** + 6 digits | `10123456`
`11654321`
`12654321` |
| **Healix** | 7 digits + **A** | `1234567A` |
| | 6 digits | `123456` |
# Collecting patient shortfalls
Source: https://support.effra.io/docs/using-effra/collecting-patient-shortfalls
When an insurer does not cover the full cost of treatment, the remaining amount is a shortfall that the patient owes your practice. Effra will automatically collect these payments on your behalf.
## Invoicing patients
If a shortfall becomes due, Effra will send the patient an invoice by email explaining the charge.
The invoice includes details of:
* The name of the practitioner
* The clinic location
* The date of treatment
* If applicable, the adjudication message from the insurer
Patients can then pay using a card or their preferred method, for example Apple Pay or Google Pay.
You can view the invoice that has been sent to a patient at any time by using these links on the invoice page of the Effra dashboard:
## Collecting patient payments outside Effra
If you collect payments for a patient outside of Effra, you simply need to mark the shortfall as paid, at which point we will cancel the invoice we've issued and no longer chase the patient for payment.
Simply click the add payment button on the invoice:
Please note, unlike insurer payments, external payments recorded in Effra are not automatically reflected in your PMS, so please make sure to add them there as well.
## Using a card on file
You can save a patient's card on file and it will be held securely using our payment processor Stripe. The patient enters their card details straight into a Stripe page where they are stored securely. They are never accessed by a member of your team or Effra.
If a shortfall becomes due, Effra will still send the patient an invoice by email and give them notice before any payment is processed. We will then collect the amount automatically on the due date. The due date is 5 days after the invoice is raised by default but this can be changed as preferred.
### Asking patients to add a card on file
You can ask patients to save their card details at any time, but the ideal opportunity is during patient registraion, before any shortfall arises.
**New patients** — Share the generic card on file link from the top right of the [patients page](https://app.effra.io/patients) in the Effra dashboard. Include this link in your registration forms, welcome emails, or other patient communications.
**Existing patients** — Share the patient-specific link from their page in the Effra dashboard when you need them to add or update their card.
You can also use [card on file reminder](/faqs/card-on-file-reminder) so Effra emails patients automatically when they have an insurance appointment but no card on file yet.
### Sample wording for patients
You can adapt the text below for your patient registration documents, welcome packs, or emails. Replace placeholders with your practice name and card on file link.
**Why do we need a payment method?**
If your health insurer does not cover the full cost of treatment (for example, if you have an excess on your policy), we need to collect the shortfall from you.
* You will receive an email invoice explaining any charges.
* We will give you notice before processing any payment.
* You can contact us directly at any time if you have questions.
* No payment will be taken today.
* We only store your card details securely with Stripe for future use.
Please add your card using this link: \[your card on file link]
# Did not attend invoices
Source: https://support.effra.io/docs/using-effra/did-not-attends
When a patient misses an appointment, you can charge them for it automatically through Effra.
## How it works
When you raise an invoice with **did not attend** in the line item description, Effra will:
* Send the invoice to the patient immediately.
* Charge the card on file, if one exists, when the invoice is due.
This lets you recover missed appointment fees without any manual chasing.
## Turning the feature on
Admins can enable did not attend invoices from the [configuration settings](https://app.effra.io/settings/config) in the Effra dashboard.
# Dispute
Source: https://support.effra.io/docs/using-effra/dispute
Effra Dispute is a feature that automatically identifies and challenges insurer shortfalls on your behalf. When an insurer incorrectly shortfalls an invoice, Effra reviews the adjudication and follows up with the insurer so you spend less time chasing claims yourself.
## How it works
Effra reviews insurer adjudications in real time, identifies eligible shortfalls, and immediately begins following up with the insurer.
Invoices that Effra is challenging are clearly marked in the Effra dashboard with a **Dispute in progress** label, so your team can see at a glance which shortfalls are already being handled by us.
Once we've resolved the issue with the insurer, the invoice will automatically get re-submitted if applicable, and the status will be updated.
# Cliniko
Source: https://support.effra.io/docs/using-effra/effra-and-your-pms/cliniko
# Storing and updating patient insurance details
Once Cliniko is set up you just need to make sure you store patient insurance details in the right place and Effra will do the rest.
Effra extracts the insurance policy number and authorisation number from each invoice. We recommend using Cliniko's [Patient Cases](https://help.cliniko.com/en/articles/3420485-getting-started-with-patient-cases) to keep track of authorised treatments.
When a patient receives a new authorisation, you should create a new Patient Case and store the insurance details in the Patient Case notes. Each appointment should then be linked to a Patient Case. When you raise an invoice for the appointment, Effra will then use the Case notes to populate the insurance details on the invoice.
The Patient Case notes should contain the authorisation number and policy number. Effra will work with any format, but we suggest the following:
**Policy number: XXXX**
**Auth code: XXXX**
For example:
If you prefer not to use Patient Cases, you can store these details within the **Invoice extra information** field on the patient:
The **Invoice extra information** field is below another similar titled field **Invoice to** field so careful not to mix them up!
**Important**: Each invoice should only have **one authorisation number**.
# Reconciling invoices between Cliniko and Xero
## Set up the Cliniko to Xero integration
Follow the [Cliniko guide to integrating Xero with your Cliniko account](https://help.cliniko.com/en/articles/1023891-integrate-cliniko-with-your-xero-account).
We also recommend using at least one dedicated clearing account within Xero to reconcile your Cliniko payments as covered in [this Cliniko guide](https://help.cliniko.com/en/articles/1023967-set-up-xero-for-use-with-cliniko).
## How invoices get marked as paid
When you create an invoice in Cliniko, the Cliniko to Xero integration automatically creates that invoice in Xero.
Then when an insurer sends a remittance, or when a patient pays their excess, Effra will automatically add relevant payments into Cliniko. These are created against the relevant invoice.
When we add these payments in Cliniko, the Cliniko to Xero integration automatically pushes the payment to Xero and applies them to the invoices it's already created there.
So Effra pushes to Cliniko, and Clinko pushes to Xero. All three platforms will be up to date with what you've been paid.
When the Cliniko to Xero integration creates these payments in Xero they appear in the clearing account as money `received`. This clearing account acts as a virtual pot of money, showing the amounts which you’ve been sent but which haven’t yet landed in your actual bank account.
## How to reconcile payouts from insurers and Stripe
When the money lands in your bank account from either the insurer or from the Effra Stripe account it will show in your Xero bank feed.
You then have to reconcile that money, which is effectively telling Xero where that money has come from.
That money has already been allocated to invoices within Xero by the Cliniko to Xero integration and marked as being in the clearing account.
So you simply tell Xero that the money has come from the clearing account into your bank account. This is reconciled as a transfer from the clearing account.
This will then show as money ‘spent’ from the clearing account, representing it leaving this virtual holding account and arriving in your actual bank account.
# Splose
Source: https://support.effra.io/docs/using-effra/effra-and-your-pms/splose
# Storing and updating patient insurance details
Having set up your Splose account with Effra, you'll need to make sure you store patient insurance details in the right place so that we can smoothly submit your invoices.
In Splose, Effra extracts the insurance policy number and authorisation number from each invoice. There are two main options to ensure that these details are included in all the relevant invoices
## Cases
The best option is to save insurance information in a case linked to the patient.
To do this:
1. Navigate to your **Patients/Clients** page within Splose
2. Search for and select a patient/client
3. Within their profile, navigate to the **Cases** tab
4. Select *New case*
5. Complete the mandatory fields and add the insurance information to the *Notes* box
6. Select *Create case* in the top right of the page
With this created, you'll be able to link appointments in your calendar to specific cases, which will in turn automatically apply the patient's insurer details to any resulting invoices.
## Patient Profile
Alternatively, you can save the details within the **Other details** section of a patient/client's profile.
To do this:
1. Navigate to your **Patients/Clients** page within Splose
2. Search for and select a patient/client
3. Within their profile, click *Edit*
4. On the **Edit details** page, add the insurance information to the *Other details box*
5. Select the *Save* button in the top right of the page
Information saved here will automatically be added to any invoice raised for the patient.
# Submitting an invoice through Effra
With your patient's insurance details saved, you're now all set to raise invoices and submit them using Effra.
There are three options to create an invoice in Splose:
1. Direct from a calendar appointment (recommended)
2. In a Client/Patient's profile, within the **Invoices** tab
3. On the **Invoices** page
Each option will take you to the **Create Invoice** page, but we'd recommend doing it directly from the calendar appointment, as this will pre-populate the patient's name, their 'Extra invoice details' and the corresponding service being billed (e.g. appointment).
Once you're happy with the details, use the Create button in the top right hand corner to issue the invoice. Effra will then recognise the invoice as an insurer one, pull it through to our system and submit it to the relevant insurer.
# TM3
Source: https://support.effra.io/docs/using-effra/effra-and-your-pms/tm3
# Storing and updating patient details
With TM3 set up, you only need to make sure that each patient's insurance details (i.e. their membership number and pre-authorisation code(s) are stored in the right place so that Effra can pick them up and submit invoices with the right details.
## Add a membership number
Membership numbers are added directly to the patient's profile by selecting **Show More** within the Contact Details tab on the left of the patient profile. There, you can then input the patient's membership number against the **Policy No:** line item.
## Add a pre-authorisation code
1. Open a patient's profile
2. Select **Add Authorisation** from the top banner
3. Complete the form with:
1. Pre-authorisation code
2. Insurer
3. Start date
4. Expiry date
5. Maximum number of appointments
6. Authorised value
4. Select **Add Treatment Auth**
5. The authorisation will now be visible within the **Authorisations** tab on the left within the patient's profile (where you can also edit its details going forward).
# Raising an invoice in TM3
Effra integrates with invoices in TM3, not the charges feature, and is configured to accommodate the standard invoicing process in TM3, so you shouldn't need to change your routine or do anything new.
1. Open the patient's profile.
2. Select **Add Invoice** from the top banner.
3. In the **Quick Bill** window, use the search bar to add the relevant insurer treatment item.
1. Add only one insurer item per invoice
4. Set the **Billed To** field to the relevant insurer, not the patient
5. Check that the location is correct
6. Select **Invoice & Pay Later**
The invoice will then be created in TM3, and Effra will automatically pull it through to be submitted
# Using Effra with your PMS
Source: https://support.effra.io/docs/using-effra/effra-and-your-pms/using-effra-with-your-pms
Effra has been designed to work seamlessly with your PMS using the processes and features that you already use.
We extract invoices and all the billing details we need from the PMS and push details back in about your payments. The guides below outline how we work with the PMS and how you can make the billing process an seamless as possible.
* [Cliniko](./cliniko)
* [Mindbody](./mindbody)
* [TM3](./tm3)
# When do payment allocations happen?
Source: https://support.effra.io/faqs/allocation-timing
Effra allocates both insurer and patient payments to invoices in your practice management system (PMS).
The general rule is that we only allocate payments when we know a payment has been made.
## Insurance payments
For insurance payments we will only allocate payments when we have received a remittance statement from them.
Some insurers give an indication that they have approved a claim, either through their portal or via email.
When this happens we mark the invoices as approved.
However these adjudications are provisional and do not always result in a payment.
Only when we receive the remittance statement will we mark the invoices as paid and allocate the payment in your PMS.
Some insurers make mistakes in the invoice numbers on their remittance statements. We auto-correct these for you, but we
manually check any changes to the invoice numbers to ensure they are correct. This can lead to a small delay in allocating the payment in your PMS.
## Patient payments
Patient payments are allocated as soon as the patient pays their Stripe invoice.
If you collect a patient payment directly you need to mark the invoice as paid in Effra and we do not allocate these payments in your PMS.
See [What do I do if the patient pays directly?](./direct-patient-payment) for more information.
# How do I use card on file?
Source: https://support.effra.io/faqs/card-on-file
Effra's card on file feature allows you to collect patient card details and charge them automatically if they need to pay a shortfall payment.
Payment details are stored securely with Stripe and are never shared with you or Effra.
For new patients you should share a generic link with them as part of your registration process.
The link can be found at the top right of the [patients page](https://app.effra.io/patients) in the dashboard.
Patients will be guided through the process of saving their card details.
For existing patients you can share a specific link with them that will take them to the card on file page.
The link can be found in the patient's page in the Effra dashboard.
When a patient owes a shortfall payment, they will be sent an invoice on the day it is raised and then charged automatically on the due date.
The due date is 5 days by default (D+5), but can be configured to 7 days (D+7).
# What is the card on file reminder?
Source: https://support.effra.io/faqs/card-on-file-reminder
Card on file reminder is an optional add-on to [card on file](./card-on-file).
When Effra receives an invoice for an insurance appointment for a patient, we submit the claim to the insurer as normal. We also check whether that patient has a card on file.
* **If they do not have a card on file**, we email the patient straight away to ask them to add one. We can **bcc your team** on that email so you can pause further treatment until the card is added, or follow up with the patient in another way.
* **If they have another insurance appointment and still no card on file**, we send the same reminder again the next time we receive an invoice for them.
Contact [support@effra.io](mailto:support@effra.io) if you would like card on file reminder enabled for your practice.
## Email sent to patients
Patients receive an email in the following form (placeholders are filled with the patient’s name, your practice name, and their personal link to add a card).
**Subject:** Please add your card details
Dear \[patient],
As part of your registration with \[clinic], we kindly ask that you provide your card details to be held securely on file.
This helps us manage appointments smoothly, collect any excess or other shortfall payments for your appointments and apply our late cancellation and non-attendance policy where necessary.
Please add your card details using the link below. If your details are not added, all future scheduled appointments may be paused until this information is provided.
For security you will be asked to confirm your date of birth before continuing. Your details will be stored securely and handled in line with our data protection standards.
\[link to add card on file]
Best regards,
\[clinic]
# How do I connect my bank account?
Source: https://support.effra.io/faqs/connect-bank-account
Instructions for connecting your bank account can be found in the [bank reconciliation guide](/docs/getting-set-up/bank-reconciliation).
# What do I do if the patient pays directly?
Source: https://support.effra.io/faqs/direct-patient-payment
Sometimes patients know they owe a shortfall before Effra does and want to pay you directly.
We always recommend taking a payment if the patient is offering to pay.
Once the patient has paid, you need to mark the invoice as paid in Effra so we don't send
the patient an invoice. You can do this by using the "Add payment" button on the invoice
page.
Payments that you manually add in Effra are not automatically recorded in your practice management system (PMS).
# What do I do if the insurer adjusts the invoice amount?
Source: https://support.effra.io/faqs/insurer-adjusted-amount
Sometimes insurers will adjust the invoice amount and then assess the claim.
The most common adjustment is changing an initial consultation to a follow-up.
When this happens, Effra will mark the invoice as `Insurer Shortfall` and include
a message explaining that the insurer has adjusted the invoice amount.
What you do next depends on whether you agree with the insurer's adjustment.
## If you agree with the adjustment
You should update the invoice amount in your practice management system (PMS) to the new amount.
You should then use the the `Sync` button on the Effra invoice page to update the invoice in Effra.
## If you disagree with the adjustment
You should [contact the insurer](../docs/insurer-contact-details) to challenge the adjustment.
# Why are some of my invoices missing?
Source: https://support.effra.io/faqs/missing-invoices
Effra looks for new insurer invoices in your practice management system (PMS) every 15 minutes.
If an invoice is missing, it could be because:
* The invoice was not raised for an insurer treatment.
* The invoice date is several days or weeks in the past.
* Effra is not processing invoices for the given insurer for you.
To ensure invoices are processed promptly we recommend:
* Raise invoices as soon as the treatment is completed, ideally on the same day.
* Make sure the insurer's name is included on every line item in the invoice.
At the start of each month, Effra checks for invoices up to three months in the past to ensure none are missed.
However because this audit only runs monthly, there may be a delay in processing invoices that are raised with older invoice dates.
If you do end up raising an invoice late, please use the current date as the invoice date rather than the treatment date.
# How do I update patient invoices?
Source: https://support.effra.io/faqs/patient-invoices
We send patient invoices on your behalf using Stripe.
This means the invoices are branded with your practice name and contact details and Stripe pays out directly to your bank account.
If a patient has a query about an invoice, their reply will go to the address that you've set as your support email address in your [organisation settings](https://app.effra.io/settings/organisation).
You can update the [branding](https://dashboard.stripe.com/settings/branding) in Stripe.
The contents of the invoices cannot be edited. We have carefully designed the invoices so that patients receive all
the information they need in a clear and understandable way. This helps ensure they pay promptly.
# Getting remittance statements from insurers
Source: https://support.effra.io/getting-remittance-statements-from-insurers
Receiving remittance statements from insurers is essential for matching payments against the invoices you have submitted. Without them, it can be a challenge to identify shortfalls, deductions or unpaid claims. As each insurer offers different ways to receive remittance statements, getting hold of them can be very confusing.
## Using Healthcode to receive remittance statements
Some clinics choose to use Healthcode to receive their remittance statements from insurers. Healthcode stores these for 3 months, unless you’re on a paid package which can extend that period for up to 18 months.
## Receiving remittance statements directly from insurers
All insurers have ways to deliver remittance statements directly to providers. With that in mind, we’ve outlined the different ways that you can receive your remittance statements from the major UK insurers.
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| Yes, you can access your remittance statements via Allianz’s online portal for [Intermediaries, TPAs and Providers](https://my.allianzworldwidecare.com/sol/login.do) | No | Yes | No |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| No | Yes | You can receive remittance statements via email, but this has to be set up with Aviva directly. | No |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| No | Yes | No | To request a specific remittance, use this [Copy Remittance Form](https://provider.axahealth.co.uk/payment-support-service/form/copy-remittance-axa-health/) |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| No | No | Yes, AXA Global should return a remittance statement to the email address from which you submitted the invoice.
If you would like to query a submitted invoice, you can contact AXA Global at [HASinternational.health@axa.com](mailto:HASinternational.health@axa.com) | No |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| Yes, you can access your remittance statements via Bupa’s online portal, [Bupa Providers Online](https://identity.provider.bupa.co.uk/am/XUI/?realm=/bravo\&goto=https%3A%2F%2Fidentity.provider.bupa.co.uk%3A443%2Fam%2Foauth2%2Fauthorize%3Fstate%3DpxrxJhrXMjUyUZHv3xa06r0pFws%26nonce%3DS9K2JM2rS7T7s_DI%26realm%3Dbravo%26response_mode%3Dform_post%26redirect_uri%3Dhttps%3A%2F%2Fprovidersonline.bupa.co.uk%3A443%2Fproviders-online%2Fagent%2Fcdsso-oauth2%26response_type%3Did_token%26scope%3Dopenid%26client_id%3DPOLAgent%26agent_provider%3Dtrue%26agent_realm%3D%2Fbravo#/) | Yes | No | No |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| Yes, you can access your remittance statements via Bupa Global’s online portal, [Bupa Provider World](https://www.bupainternational.com/providerworld/) | Yes | No | No |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| Yes, you can access your remittance statements via Cigna’s online portal, [Cigna for Health Care Professionals](https://cignaforhcp.cigna.com/app/login) | Yes | No | No |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| No | No | Yes, Healix will send your remittance statements to the email address you provide when setting up your billing details with them. | No |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| No | No | Yes | To request a specific remittance, use this [Copy Remittance Form](https://www.vitality.co.uk/healthcare-providers/contact-us/provider-query/copy-remittance/) |
| Insurer portal | Healthcode | Email | Insurer web form |
| - | - | - | - |
| Yes, you can access them through the [WPA Secure Hub](https://my.wpa.org.uk/login) | No | Yes | No |
With each insurer doing things slightly differently, getting hold of your remittance statements and matching them to your invoices can be time consuming. If you are looking for ways to save time on your billing and manage it more conveniently, consider [Effra](https://www.effra.io/).
We bill health insurers for you, both directly and via Healthcode, and then automatically allocate your remittance statements to the original invoices in your practice management system. We also give you an intuitive platform to monitor the status of your invoices, remittances and payments.
# How do I cancel an invoice?
Source: https://support.effra.io/how-do-i-cancel-an-invoice
You can cancel an invoice in Effra at any time using the red **Cancel** button at the top of all invoices.
Remember:
* Cancelling an invoice in Effra does **not** automatically cancel or recoup a claim that has already been submitted to the insurer.
* Cancelling an invoice in Effra does **not** automatically cancel the corresponding invoice in your PMS (and vice-versa), so please remember to cancel it there as well if necessary.
Accordingly, depending of the invoice context, you may have some secondary actions. There are three possible scenarios:
No further action is required.
You may need to request a recoup or cancel the submission with the insurer. To do so, raise a support request within the invoice.
This depends on your understanding of the submission, but we would generally recommend waiting for an adjudication before you take further action
# Why have we written this guide?
Source: https://support.effra.io/intro
As a healthcare provider, getting paid by insurers can be a headache, not least because each major UK health insurer has their submission, adjudication and remittance processes set up in different ways.
At Effra, we spend a lot of our time thinking about health insurer billing and how we can make it easier for busy practitioners. Whilst doing so, we’ve built up a strong understanding of how each UK insurer handles claims.
So, we’ve pulled together a guide that walks you through the process and highlights the pitfalls you should be aware of.
# Nookal
Source: https://support.effra.io/nookal
# Storing and updating patient insurance details
Once Nookal is set up, you just need to make sure the patient and insurance details are stored in the right place and Effra will do the rest.
When creating a case for a patient, add their insurer membership number and pre-authorisation number to the **Reference** field. You should also include the relevant diagnosis details in the case title. If you prefer, the pre-authorisation number can be stored in the **Notes** field instead.
If using the reference box, space is limited, so we'd recommend using the following format:
**Pol: XXXX; Auth: XXXX**
If you prefer, the pre-authorisation number can be stored in the **Notes** field instead.
You should also make sure the patient’s **address, email address and date of birth** are stored in their Nookal patient profile.
You can then create the insurance invoice as you normally would in Nookal, either from the diary appointment or from within the patient’s account.
Finally, make sure the invoice uses the correct insurer-specific invoice item. The item should include the insurer’s name so that Effra can identify which insurer the invoice should be submitted to.
# Managing your providers
Source: https://support.effra.io/setting-up-and-managing-your-providers
## **Viewing your providers**
You can view and manage your providers from:
*Settings* **→** *Providers*
Here you will see all of the clinic, location and practitioner profiles currently set up on your Effra account.
Before adding a new practitioner, check this list to make sure they have not already been set up.
## **Adding a practitioner or location**
If you bill insurers using an individual practitioner's provider number, you will need to add that practitioner to Effra.
1. Go to **Settings → Providers**.
2. Click **Add provider**.
3. Select the correct provider type from the drop down menu.
4. Enter the practitioner's name.
5. Add any names (aliases) they may appear under in your practice management system.
6. Add their professional registration number.
7. Add their provider number for each insurer they are registered with.
8. Click **Create provider**.
You only need to enter provider numbers for insurers that the practitioner is registered with.
### **Practice management system aliases**
Effra uses the practitioner's name to match invoices from your practice management system to the correct provider.
If a practitioner can appear under a different name in your practice management system, add this as an alias.
For example, if the provider is set up in Effra as **Alexandra Smith**, but appears in your PMS as **Alex Smith**, add **Alex Smith** as an alias.
If there are multiple variations, enter each one on a separate line.
You do not need to create a second provider simply because the same practitioner appears under a different name.
### **Professional registration number**
Select the practitioner's professional registration type and enter their registration number (e.g. HCPC or GOsC)
Effra uses this information when preparing certain insurer submissions, so invoices may move to **Action Required** if the required registration information is missing.
## **If an invoice says the provider is missing**
An invoice may move to **Action Required** if Effra cannot match the practitioner on the invoice to a provider in your account.
Check that:
* the practitioner has a provider profile in **Settings → Providers**
* their name or PMS alias matches the practitioner on the invoice
* their professional registration details are present
* their provider number for the relevant insurer has been added
If everything appears to be configured correctly and the invoice remains in Action Required, contact Effra support from the invoice.
# Setting up your providers
Source: https://support.effra.io/setting-up-your-providers
## **What is a provider?**
In Effra, a provider is the clinic, location or practitioner whose details are used when submitting invoices to insurers.
Depending on how you are registered with each insurer, you may bill under:
* a **clinic provider number**
* a **location-specific provider number**
* an **individual practitioner’s provider number**
## **How many providers do I need to set up?**
You need a provider in Effra for each clinic, location or practitioner whose details you use to bill insurers.
If you bill an insurer using your **clinic provider number**, you can add that provider number to your clinic profile. Your clinic profile is automatically created when your Effra account is set up.
If an insurer recognises different **locations** separately, you may also have separate provider profiles for those locations, each with its relevant provider number.
If you bill an insurer using individual practitioner provider numbers, you should create a **separate provider** for each practitioner you bill under. For each practitioner, you should also
For example, you might bill Bupa using a clinic provider number, but bill Aviva using individual practitioner provider numbers. In this case, the Bupa number would sit against the relevant clinic or location profile, while each Aviva-recognised practitioner would need their own provider profile in Effra.
# Splose
Source: https://support.effra.io/splose
# Setting up Splose
To get Splose set up there are two steps:
1. [Grant Effra access to Splose](#grant-effra-access-to-splose)
2. [Set up payment methods](#set-up-payment-methods)
## **Grant Effra access to Splose**
1. In the top right, click **Settings**
2. In the left sidebar menu, click **Users**
3. In the top right, click **Invite users**
4. Complete the required fields in the following way:
1. First Name: Effra
2. Last Name: Ltd
3. Email: [robot@effra.io](mailto:robot@effra.io)
4. Role: Practice Manager
5. Click **Send**
## **Set up payment methods**
1. In the top right, click **Settings**
2. In the left sidebar menu, click **Payments**
3. Scroll to the bottom, click **Add payment method**
4. Complete the required field in the following way:
1. Name: Effra Patient Payment
5. Tick the box marked **Active**
6. Click **Create**
7. Repeat to create another payment method
1. Name: Effra Insurer Payment
# Why can’t Effra submit an invoice for my practitioner or clinic?
Source: https://support.effra.io/submit-an-invoice-for-provider
Effra can only submit an invoice where the practitioner or clinic is correctly configured for the relevant insurer.
If an invoice is in **Action Required** because of the provider, check that the relevant practitioner or clinic has been added to Effra and that their insurer details are correct.
You can add providers and edit their details from the **Providers** tab in your settings.
If the provider is already set up and the invoice is still in Action Required, leave a comment on the invoice and tick **Send to Effra support**.
# Submitting invoices to insurers
Source: https://support.effra.io/submitting-invoices-to-insurers
Many insurers prefer invoices to be submitted through Healthcode, a centralised clearing house that is integrated with the insurers. However, Healthcode charges for this service, so some providers prefer to submit their invoices directly. All major UK insurers can be billed directly, but the submission method(s) vary depending on the insurer.
In the table below, we’ve outlined the ways in which you can submit directly to each of the main insurers as a provider and the corresponding time period you have to do so. In the drop down underneath it, you'll find all the relevant details, including email addresses and links to web forms and portals used for direct submission.
Please note, where we use the term portal in this article, we mean a platform where you log in as a provider and submit your invoices (and use any other features it has). By contrast, a web form is simply a web page which allows you to submit your invoices without a linked account.
## Overview
| Insurer | Direct Submission Method | Submission Time Period |
| :- | :- | :- |
| Allianz | Email | 60 days |
| Aviva | Web form | 6 months |
| AXA | Web form | 6 months |
| AXA Global | Email | 6 months |
| Bupa | Portal | 6 months |
| Bupa Global | Portal | 6 months |
| Cigna | Email | Participating provider: 3 months
Out of network provider: 6 months |
| Healix | Email | 6 months |
| Vitality | Web form | 3 months |
| WPA | Portal and Web form | 6 months |
## Details and Links
Submission method: **Email**
Single claims should be emailed to: [**Claims@allianzworldwidecare.com**](mailto:Claims@allianzworldwidecare.com)
Batch claims should be emailed to: **[Clinic.claims@e.allianz.com](mailto:Clinic.claims@e.allianz.com).**
Submission method: **Web form**
Invoices can be submitted through Aviva’s Online Billing Platform, accessible [using this link.](https://www.aviva.co.uk/health-insurance/providers/practitioners/practitioneronlinebilling/)
Submission method: **Web form**
You can submit an invoice via AXA’s online form, accessible [using this link](https://provider.axahealth.co.uk/payment-support-service/form/submit-invoice-updated/).
Submission method: **Email**
Invoices should be emailed to [medicalinvoices.health@axa.com](mailto:medicalinvoices.health@axa.com)
Submit each invoice in a separate PDF file, making sure it includes:
* Customer’s name and date of birth
* AXA Global Healthcare customer number
* Claim number
* Treatment dates
* A breakdown of costs
* Your bank details
* Whether we should pay you directly, or pay the customer directly
* Your unique Provider ID (7XXXXXX)
Submission method: **Portal**
Invoices should be submitted via Bupa’s Providers Online Portal, accessible [using this link](https://providersonline.bupa.co.uk/providers-online). You will need to set up an account as a registered provider.
Submission method: **Portal**
Invoices should be submitted via Bupa Global’s ProviderWorld Online Portal, accessible [using this link](https://www.bupainternational.com/providerworld/). You will need to set up an account as a registered provider.
Submission method: **Email**
Invoices should be emailed to [bills@cigna.com](mailto:bills@cigna.com)
Submit each invoice in a separate PDF file, making sure it includes:
* Invoice date
* CIGNA Provider Number
* CIGNA Membership Number
* Member’s full name
* Member’s date of birth
* Member’s full address
* Total Fees
Submission method: **Email**
Invoices should be emailed to [HHSInvoices@healix.com](mailto:HHSInvoices@healix.com)
Submission method: **Web form**
Invoices should be submitted via Vitality’s online Invoice Submission Form, accessible [using this link](https://forms.microsoft.com/pages/responsepage.aspx?id=q4GdsF1ZzU2rJGpWVuGNiRyRBcvKUN5PuZXRnRURtAdUQ01DNE9LVVgyOFpUMk80WVk0RVdYNUVNQy4u\&route=shorturl).
Submission method: **Portal and Web form**
Invoices can be submitted via WPA’s ‘My WPA’ secure hub for healthcare providers, accessible [using this link](https://my.wpa.org.uk/register). You will need to set up an account as a registered provider with WPA recognition.
Alternatively, WPA also accepts submissions by webform, accessible [using this link](https://wpawebforms.wpa.org.uk/providercontact/). You should select the reason for contact as ‘Submit an Invoice’ from the drop down menu. On the following page, you will then be able to upload your invoice as a PDF.
Make sure the invoice contains the following:
* Must be on headed paper (not handwritten)
* Provide clear details on the treating provider
* Patient Name, Address or DOB and WPA Customer Number or Claim Reference
* Invoice number and date
* Treatment date
* Treatment provided
* Unit cost
* Clearly receipted if already paid
Many of these options are time consuming. If you are looking for ways to save time on your billing and manage it more conveniently, consider [Effra](https://www.effra.io/). We automatically bill health insurers for you, both directly and via Healthcode. We also offer an intuitive platform for you to monitor the status of your invoices, remittances and payments.
# Why is my invoice in Action Required and what do I do?
Source: https://support.effra.io/why-is-my-invoice-in-action-required
An invoice moves into **Action Required** when Effra needs some information from you before we can submit it to the insurer.
Open the invoice and look at the Action Required message. This will explain what is needed and, wherever possible, allow you to resolve the issue directly from the invoice.
Common examples include:
* **Missing or invalid patient insurance details** — for example, a policy number or pre-authorisation number needs to be added or corrected.
* **A billable item needs to be configured** — select the appropriate procedure so Effra knows how the line item should be submitted.
* **Provider information is missing** — the practitioner or provider may need additional details before we can bill the insurer.
Remember, if you add or update details in the PMS invoice, you will need to **re-sync** the invoice in Effra for it to update.
Once the issue has been resolved, Effra will automatically continue processing the invoice.
If you’re unsure what to do, leave a comment on the invoice and tick **Send to Effra support**.